Серия DLC

DLC-02

DLC-02 is a multi-master controller to obtain the regulation of the DALI-2 system from DALI input devices and control gears to make a DALI lighting system. Devices in the DALI bus can be scan, configure and setting through the DLC-02 software. DLC-02 supports up to 128 DALI participants via two independent DALI Bus. The DALI Bus power supply comes directly within DLC-02, so no additional DALI power supply is required.This device comes in 4 built-in relays, providing switching possibilities for home applications and non-dimmable lighting.In addition,DLC-02 is also integrated with several features. The Effect function allows users to customize a series of events and function of input devices. Thanks to an embedded battery, time is memorized even AC is lost. The clock of DLC-02 can be synchronized in real-time; therefore, the regular events and actions can be scheduled by the Timer function accordingly. In addition, the built-in Modbus TCP/IP protocol is very flexible to adapt with other manufacturers' control software.

• Comply with IEC 62386 DALI-2, and Part 101/103/207/208/301/302/303/304
• 2 x channels of DALI bus, for control gear and control device using
• 4 x programmable relays, for electrical switch or curtains control
• DLC software for system settings or remotely through internet
• Built-in LCD display and control buttons to set and view settings
• Built-in timer IC, commission schedule
• Communication interface: RJ-45 and KNX, for connection expansion with other building automation systems
• DIN-Rail mounting, compact design 8SU width (144x 90x 58.4mm)

DLC-02-KN

DLC-02-KN is a KNX to DALI gateway used to connect a digital DALI lighting system to the KNX installation. It enables the room-based lighting control units to be conveniently incorporated into the higher-level KNX building management system. This device transforms switch and dim commands from the connected KNX system into DALI telegrams and status information from the DALI bus into KNX telegrams. DLC-02-KN supports up to 128 DALI participants via two independent DALI Bus. The DALI Bus power supply comes directly within DLC-02-KN, so no additional DALI power supply is required. This device comes in 4 built-in relays, providing switching possibilities for home applications and non-dimmable lighting. In addition, DLC-02-KN is also integrated with several features. The Sequence function allows users to customize a series of brightness values and color gradients with limited cycles (1-255) or unlimited cycles, which is suitable for entertainment applications. Thanks to an embedded battery, time is memorized even AC is lost. The clock of DLC-02-KN can be synchronized in real-time; therefore, the regular events and actions can be scheduled by the Timer function accordingly. Furthermore, Standby switch-off function can be realized in combination with a KNX switch actuator (e.g., KAA-8R-S). Through this setup, when all DALI devices are under OFF status, DLC-02-KN can inform the actuator to cut-off AC input of DALI ECGs to save energy.

• Comply with IEC 62386 DALI-2, and Part 101/103/207/208/301/302/303/304
• 2 x channels of DALI bus, for control gear and control device using
• 4 x programmable relays, for electrical switch or curtains control
• DLC software for system settings or remotely through internet
• Built-in LCD display and control buttons to set and view settings
• Built-in timer IC, commission schedule
• Communication interface: RJ-45 and KNX, for connection expansion with other building automation systems
• DIN-Rail mounting, compact design 8SU width (144x 90x 58.4mm)

DLC03

• Module Type Selection Guide
• Regulated and unregulated models
• ±10% input range
• On board module type, assemble on the main PCB of the system